Features
● Take two aluminum alloy window materials that have been cut to 45°, use the angle code put into the window, move the striker, and squeeze and nail the two window materials tightly to form a 90-degree angle firmly.
● The machine is based on the characteristics of the angle code. It can be designed as a single-sided four-point collision, so the extrusion is firmer. Due to the enlarged size and impact force, it is especially suitable for the corners of the frame material, fan material and door material of the heat-insulating profile.
Technical Parameters
Power supply: 380V 50Hz
Power: 1.5Kw
Motor speed: 1400r/min
Processing profile height: 120mm
Processing profile width: 90mm
Air pressure: 0.5～0.8MPa
Overall dimension: 2200×1100×1300mm
● Take two aluminum alloy window materials that have been cut to 45°, use the angle code put into the window, move the striker, and squeeze and nail the two window materials tightly to form a 90-degree angle firmly.
● The machine is based on the characteristics of the angle code. It can be designed as a single-sided four-point collision, so the extrusion is firmer. Due to the enlarged size and impact force, it is especially suitable for the corners of the frame material, fan material and door material of the heat-insulating profile.
Technical Parameters
Power supply: 380V 50Hz
Power: 1.5Kw
Motor speed: 1400r/min
Processing profile height: 120mm
Processing profile width: 90mm
Air pressure: 0.5～0.8MPa
Overall dimension: 2200×1100×1300mm
